The new Fronius wireless transceiver sends data wirelessly from inverter to PC. This handy wireless module consists of two components. One connects to the Datalogger (or another DatCom component) and the other connects to a PC or laptop. This does away with costly cabling and there is no more drilling into the wall. It is also especially practical since you can move your PC from room to room.
The all-purpose wireless module can be connected to a large display, all interface components as well as a Datalogger. This intelligent device automatically recognizes its counterpart, doing away with additional configuration effort.
The Fronius wireless transceiver was specially developed for Fronius DatCom products. It has a range of up to 30 m (98 ft) in buildings and up to 200 m (656 ft) out in the open.
It is available in a card or box version and can be connected to either a RS-232 or USB interface (the card version - inserted into the inverter - is only available with a RS-232- interface).
The wireless transceiver will be available from Fronius at the end of June. The gross prize for a box will be € 490,- and €470,- for a card (per couple).
Technical Data:
Box dimensions: 114 x 64 x 29 mm (4.5 x 2.5 x 1.1 in.)
Card dimensions: 140 x 100 26 mm (5.5 x 3.9 x 1 in.)
Box protection class: IP20
Card protection class: corresponds to the protection class of the inverter in which it is installed
Radio frequency: 868 MHz / opt. for USA 915 MHz
Ambient temperature range: -20 to +50°C (-4 to 122 °F)
The all-purpose wireless module can be connected to a large display, all interface components as well as a Datalogger. This intelligent device automatically recognizes its counterpart, doing away with additional configuration effort.
The Fronius wireless transceiver was specially developed for Fronius DatCom products. It has a range of up to 30 m (98 ft) in buildings and up to 200 m (656 ft) out in the open.
It is available in a card or box version and can be connected to either a RS-232 or USB interface (the card version - inserted into the inverter - is only available with a RS-232- interface).
The wireless transceiver will be available from Fronius at the end of June. The gross prize for a box will be € 490,- and €470,- for a card (per couple).
Technical Data:
Box dimensions: 114 x 64 x 29 mm (4.5 x 2.5 x 1.1 in.)
Card dimensions: 140 x 100 26 mm (5.5 x 3.9 x 1 in.)
Box protection class: IP20
Card protection class: corresponds to the protection class of the inverter in which it is installed
Radio frequency: 868 MHz / opt. for USA 915 MHz
Ambient temperature range: -20 to +50°C (-4 to 122 °F)
