Construction work on the Jenoptik Group’s new high-tech fab at Dresden Airport Park began today, September 6, 2022, with a groundbreaking ceremony attended by Saxony’s Minister-President Michael Kretschmer and Mayor Stephan Kühn, Dresden’s Councillor for Urban Development, Construction, Transport and Real Estate. The two politicians ceremonially broke ground together with Jenoptik Executive Board members Stefan Traeger and Hans-Dieter Schumacher and other representatives of the photonics group. In the afternoon, the company invites its 60 employees at the site together with their families to a summer party on the construction site.
"Dresden will become a main location for our micro-optics activities. We deliberately chose one of the most important locations for the semiconductor industry in Germany and Europe, where many global companies and research institutions of the industry are present," said Stefan Traeger, President & CEO of JENOPTIK AG.
Minister-President Michael Kretschmer: "The construction of Jenoptik’s new cleanroom factory in Dresden is a strong signal and makes an important contribution to the technological advancement of microchip manufacturing. The settlement of Jenoptik proves once again the attraction of Silicon Saxony and shows how important an existing good local network is to attract new companies to the location. I am pleased that Jenoptik is convinced of this semiconductor ecosystem, which is unique in Europe, and I am sure that all partners at the location will benefit from this settlement."
Extremely demanding construction and manufacturing environment
Jenoptik is investing more than 70 million euros in the new high-tech fab with a total of 11,000 square meters of net floor space, including 2,000 square meters for clean room production. Production is scheduled to start at the beginning of 2025. The new high-tech fab will manufacture micro-optics and sensors, which are mainly used in semiconductor lithography systems. Production will take place in clean room classes ISO 5 and 3, which also meet the highest requirements for vibration-free production and temperature stability. Comprehensive vibration monitoring is also in place during the construction of the fab in order to not disrupt the production processes of neighboring companies in the industrial park.
"The federal state capital Dresden is proud to have been able to accompany such an innovative and globally active East-German group in its growth for years now. The new Jenoptik fab shows that Dresden offers an ecosystem with excellent research facilities, highly qualified specialists and strong partners in which high-tech companies are constantly developing," said Dresden Lord Mayor Dirk Hilbert about the Jenoptik investment.
High environmental standards taken into account
In addition to precise manufacturing conditions, the high-tech fab also meets high environmental standards: Jenoptik aims to meet the "KfW 40 Standard" and "LEED Gold Standard Certification", currently the most comprehensive and stringent building criteria in terms of sustainability. To achieve this, comprehensive environmentally friendly measures are planned, such as a photovoltaic system, recycled materials during construction, a highly efficient building envelope including greening, cold and heat recovery, and intelligent control technology.
Photonics as a growth driver
Jenoptik has been active in Dresden since 2007 and currently has more than 60 employees on site. With the new production facility, Jenoptik will concentrate manufacturing in Dresden, which is currently spread across several smaller external locations. The photonics group is creating 60 additional high-quality jobs and increasing its local workforce to a total of well over 120 employees. In addition to Dresden, Jenoptik also manufactures its high-precision and micro-optics at the Thuringian sites Jena and Triptis (polymer optics), in Heerbrugg, Switzerland, as well as in Jupiter (Florida) and Huntsville (Alabama), USA. In the Advanced Photonic Solutions division, around 2,300 employees work on photonic technologies for the success of future industries.
Optics & sensors for the semiconductor equipment industry as well as other sectors such as medical technology & life sciences or IT infrastructure & communications are key growth drivers for Jenoptik. As a photonics group, Jenoptik is focusing on expanding these business areas, which are expected to generate around 75 percent of the 1.2 billion euros in revenue targeted by 2025. "To this end, we are investing both in the acquisition of companies, as demonstrated by our recent acquisitions, and in organic growth, for example by expanding our own infrastructure. The Dresden high-tech fab is the largest single investment in Jenoptik’s recent history," said CFO Hans-Dieter Schumacher.
With the new fab, Jenoptik is meeting the rapidly growing demand for photonic solutions. Industry experts predict further growth for the semiconductor equipment industry – the main customer of the new fab’s products – in the next years.
Focus on high demand for micro-optics
An important area of application for micro-optics is the semiconductor equipment industry. For example, micro-optical sensors enable the exact positioning of wafers during lithographic processes for chip production. Applications include both DUV and EUV lithography. Micro-optics and micro-optical sensors are characterized by highest precision in smallest space and very flat design. They direct light by means of micro- and nanostructures and – unlike classical optics – are manufactured in a lithography process similar to semiconductor production. In addition to chip production, they are used in other primarily technological manufacturing processes that require highly precise and or very flexible positioning of light for process steps, for example in laser material processing, or quality assurance, for example in inspection processes. The very light and small individual components, often only a few micrometers in size, can be combined to form miniaturized scanning and switching systems with flexible multiple applications.
Fab facts and figures
Timeline
"Dresden will become a main location for our micro-optics activities. We deliberately chose one of the most important locations for the semiconductor industry in Germany and Europe, where many global companies and research institutions of the industry are present," said Stefan Traeger, President & CEO of JENOPTIK AG.
Minister-President Michael Kretschmer: "The construction of Jenoptik’s new cleanroom factory in Dresden is a strong signal and makes an important contribution to the technological advancement of microchip manufacturing. The settlement of Jenoptik proves once again the attraction of Silicon Saxony and shows how important an existing good local network is to attract new companies to the location. I am pleased that Jenoptik is convinced of this semiconductor ecosystem, which is unique in Europe, and I am sure that all partners at the location will benefit from this settlement."
Extremely demanding construction and manufacturing environment
Jenoptik is investing more than 70 million euros in the new high-tech fab with a total of 11,000 square meters of net floor space, including 2,000 square meters for clean room production. Production is scheduled to start at the beginning of 2025. The new high-tech fab will manufacture micro-optics and sensors, which are mainly used in semiconductor lithography systems. Production will take place in clean room classes ISO 5 and 3, which also meet the highest requirements for vibration-free production and temperature stability. Comprehensive vibration monitoring is also in place during the construction of the fab in order to not disrupt the production processes of neighboring companies in the industrial park.
"The federal state capital Dresden is proud to have been able to accompany such an innovative and globally active East-German group in its growth for years now. The new Jenoptik fab shows that Dresden offers an ecosystem with excellent research facilities, highly qualified specialists and strong partners in which high-tech companies are constantly developing," said Dresden Lord Mayor Dirk Hilbert about the Jenoptik investment.
High environmental standards taken into account
In addition to precise manufacturing conditions, the high-tech fab also meets high environmental standards: Jenoptik aims to meet the "KfW 40 Standard" and "LEED Gold Standard Certification", currently the most comprehensive and stringent building criteria in terms of sustainability. To achieve this, comprehensive environmentally friendly measures are planned, such as a photovoltaic system, recycled materials during construction, a highly efficient building envelope including greening, cold and heat recovery, and intelligent control technology.
Photonics as a growth driver
Jenoptik has been active in Dresden since 2007 and currently has more than 60 employees on site. With the new production facility, Jenoptik will concentrate manufacturing in Dresden, which is currently spread across several smaller external locations. The photonics group is creating 60 additional high-quality jobs and increasing its local workforce to a total of well over 120 employees. In addition to Dresden, Jenoptik also manufactures its high-precision and micro-optics at the Thuringian sites Jena and Triptis (polymer optics), in Heerbrugg, Switzerland, as well as in Jupiter (Florida) and Huntsville (Alabama), USA. In the Advanced Photonic Solutions division, around 2,300 employees work on photonic technologies for the success of future industries.
Optics & sensors for the semiconductor equipment industry as well as other sectors such as medical technology & life sciences or IT infrastructure & communications are key growth drivers for Jenoptik. As a photonics group, Jenoptik is focusing on expanding these business areas, which are expected to generate around 75 percent of the 1.2 billion euros in revenue targeted by 2025. "To this end, we are investing both in the acquisition of companies, as demonstrated by our recent acquisitions, and in organic growth, for example by expanding our own infrastructure. The Dresden high-tech fab is the largest single investment in Jenoptik’s recent history," said CFO Hans-Dieter Schumacher.
With the new fab, Jenoptik is meeting the rapidly growing demand for photonic solutions. Industry experts predict further growth for the semiconductor equipment industry – the main customer of the new fab’s products – in the next years.
Focus on high demand for micro-optics
An important area of application for micro-optics is the semiconductor equipment industry. For example, micro-optical sensors enable the exact positioning of wafers during lithographic processes for chip production. Applications include both DUV and EUV lithography. Micro-optics and micro-optical sensors are characterized by highest precision in smallest space and very flat design. They direct light by means of micro- and nanostructures and – unlike classical optics – are manufactured in a lithography process similar to semiconductor production. In addition to chip production, they are used in other primarily technological manufacturing processes that require highly precise and or very flexible positioning of light for process steps, for example in laser material processing, or quality assurance, for example in inspection processes. The very light and small individual components, often only a few micrometers in size, can be combined to form miniaturized scanning and switching systems with flexible multiple applications.
Fab facts and figures
Timeline
- Purchase of land: May 2021
- Groundbreaking: September 2022
- Topping out ceremony: mid 2023
- Interior work: 2nd half of 2024
- Production start/opening: early 2025
- Site area: 24,000 sqm,
- of which approx. 60% sqm currently under construction
- of which approx.40% sqm later expansion/extension options
- total net area incl. all technical and ancillary areas: approx. 11,000 sqm net
- of which clean room/production area: 2,000 sqm
- of which logistics area: approx. 800 sqm
- of which technical areas (for building technology as well as media supply): 4,000 sqm
- of which office areas: approx. 1,500 sqm
- of which meeting area, showroom and reception area: 500 sqm
- Planning: RSE Architekten Ingenieure GmbH, Stuttgart, Germany
- General and technical building services planning: CRC Clean Room Consulting GmbH, Freiburg, Germany
- Construction: individual awarding of the trades
