.
- 8 10/100TX + 4 1000T L2+ 8 PoE AT/AF Industrial Managed Switch w/ITU G.8032 Ring & PTP
- EN50155 compliance & IEEE802.3AT/AF up to 30W PoE output
- Optional 12V input boost to 48V output for IEEE802.3AT/AF max.90W
- ITU G.8032 standard ring protection < 50ms incl. data & multicast packets; MSTP
- IP67/IP43 housing; User friendly UI & Auto topology drawing
- Miss-wiring avoidance & Repowered auto ring restore
- Support LACP link aggregation, IGMP v3, QinQ, SSH/SSL, TACAS+, ACL, IPv6, SMS alert
- Support PTPv2 <1us, relay contact & environmental monitoring
- PoE management incl. Detection and Scheduling
Lantech IPES-5408T (IP67/IP43) is a high performance L2+ IP67/IP43 industrial Gigabit uplink switch with 8x10/100TX + 4 GigaT w/8 PoE AT/AF injectors by M12 connectors which provides L2 wire speed and advanced security function for connecting PD network. It delivers ITU G.8032 ring recovery less than 50ms, comprehensive QoS, IGMPv1/v2/v3 & routing, QinQ (double tag VLAN) , MVR (multicast VLAN registration) , LACP link aggregation and advanced security including ACL, TACAS+, SSH/SSL, DHCP Option 82 which are important features required in large network. It also supports Cisco Discovery Protocol (CDP) and LLDP for Ciscoworks to detect the switch info to be shown on L2 map topology. The user friendly UI, innovative auto topology drawing and topology demo makes IPES- 5408T (IP67/IP43) much easier to get hands-on.
IPES-5408T (IP67/IP43) supports IEEE802.3AT/AF standard which can feed HI-power up to 30W at each PoE port for big power consumption devices like PTZ IP camera, High power wireless AP etc. The advanced PoE management includes PoE detection and scheduling besides the regular PoE per port status. PoE detection can detect if the connected PD is hang up then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. The optional 12V model is able to take 12V input and boost to 48V output for PoE feeding in vehicle use with IEEE802.3AT/AF standard up to 30W per PoE port with maximum 90W output.
Lantech IPES-5408T (IP67/IP43) features ITU G.8032 ring which can be self-healed in less than 50ms up to 256 switches for ring/chain topologies which covers data & multicast packets protection. The innovative auto-Ring configurator can calculate owner and neighbor in a ring which makes ITU G.8032 ring setup never been easier. It supports MSTP that allows RSTP over Vlan for redundant links.
The IPES-5408T (IP67/IP43) also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by misswiring, Lantech IPES-5408T (IP67/IP43) is able to alert with the LED indicator and send out an email, traps or a SMS text. Repowered auto ring restore function ensures the switches in a ring to survive
- 8 10/100TX + 4 1000T L2+ 8 PoE AT/AF Industrial Managed Switch w/ITU G.8032 Ring & PTP
- EN50155 compliance & IEEE802.3AT/AF up to 30W PoE output
- Optional 12V input boost to 48V output for IEEE802.3AT/AF max.90W
- ITU G.8032 standard ring protection < 50ms incl. data & multicast packets; MSTP
- IP67/IP43 housing; User friendly UI & Auto topology drawing
- Miss-wiring avoidance & Repowered auto ring restore
- Support LACP link aggregation, IGMP v3, QinQ, SSH/SSL, TACAS+, ACL, IPv6, SMS alert
- Support PTPv2 <1us, relay contact & environmental monitoring
- PoE management incl. Detection and Scheduling
Lantech IPES-5408T (IP67/IP43) is a high performance L2+ IP67/IP43 industrial Gigabit uplink switch with 8x10/100TX + 4 GigaT w/8 PoE AT/AF injectors by M12 connectors which provides L2 wire speed and advanced security function for connecting PD network. It delivers ITU G.8032 ring recovery less than 50ms, comprehensive QoS, IGMPv1/v2/v3 & routing, QinQ (double tag VLAN) , MVR (multicast VLAN registration) , LACP link aggregation and advanced security including ACL, TACAS+, SSH/SSL, DHCP Option 82 which are important features required in large network. It also supports Cisco Discovery Protocol (CDP) and LLDP for Ciscoworks to detect the switch info to be shown on L2 map topology. The user friendly UI, innovative auto topology drawing and topology demo makes IPES- 5408T (IP67/IP43) much easier to get hands-on.
IPES-5408T (IP67/IP43) supports IEEE802.3AT/AF standard which can feed HI-power up to 30W at each PoE port for big power consumption devices like PTZ IP camera, High power wireless AP etc. The advanced PoE management includes PoE detection and scheduling besides the regular PoE per port status. PoE detection can detect if the connected PD is hang up then restart the PD; PoE scheduling is to allow pre-set power feeding schedule upon routine time table. The optional 12V model is able to take 12V input and boost to 48V output for PoE feeding in vehicle use with IEEE802.3AT/AF standard up to 30W per PoE port with maximum 90W output.
Lantech IPES-5408T (IP67/IP43) features ITU G.8032 ring which can be self-healed in less than 50ms up to 256 switches for ring/chain topologies which covers data & multicast packets protection. The innovative auto-Ring configurator can calculate owner and neighbor in a ring which makes ITU G.8032 ring setup never been easier. It supports MSTP that allows RSTP over Vlan for redundant links.
The IPES-5408T (IP67/IP43) also embedded several features for stronger and reliable network protection in an easy and intuitive way. When the pre-set ring configuration failed or looped by misswiring, Lantech IPES-5408T (IP67/IP43) is able to alert with the LED indicator and send out an email, traps or a SMS text. Repowered auto ring restore function ensures the switches in a ring to survive
