- DO-18-247 cut several mineralized zones, including 0m of 3.49 g/t Au, including 6.0m of 9.32 g/t Au, both uncapped (see Figure 2A).
- DO-18-254 cut 5m of 1.25 g/t Au, including 2.1m of 5.36 g/t Au (see Figure 2B)
- DO-18-244 cut several mineralized zones, including 7m of 2.06 g/t Au and three others over 1 g/t Au (see Figure 2C)
Maple Gold’s President and CEO, Matthew Hornor, stated: “We continue to intersect new zones of mineralization and given the widely spaced drilling in this eastern part of the Resource Area there is still good potential to make additional discoveries with further drilling.”
DO-18-247 (Figure 1 and 2A) confirmed the down-dip extension of the mineralized zones cut in historical hole DO-11-72 collared 260m to the north, with a significantly higher-grade intercept in the 2018 hole as compared to historical holes. Compared to the existing block model, DO-18-247 will improve block grades, and should allow the conceptual pit to extend to greater depth. Similarly, DO-18-254 confirmed the lateral continuity of the same interpreted mineralized zone, again with higher than expected grades. The up-dip extension of this zone will require additional drilling. The DO-18-254 intercept of 27.5m averaging 1.25 g/t Au intercept is part of a broader and lower grade envelope of 61.5m averaging 0.76 g/t Au.
Drill-hole DO-18-244 was collared 325m to the NE of DO-18-247, and was an infill hole that confirmed continuity of mineralization between older holes. In addition, the hole also cut 4 separate high-grade zones outside the northern limits of the current blocks that are interpreted to be new zones. The nearest drill-holes testing these structures occur 141m to the west. This eastern portion of the Porphyry Zone is a geologically more complex part of the deposit. Syenite is less abundant in this area as compared to the western part of the Porphyry Zone (see Figure 2: A, B & C).
Qualified Person
The scientific and technical data contained in this press release was reviewed and prepared under the supervision of Fred Speidel, M. Sc, P. Geo., Vice-President Exploration, of Maple Gold. Mr. Speidel is a Qualified Person under National Instrument 43-101 Standards of Disclosure for Mineral Projects. Mr. Speidel has verified the data related to the exploration information disclosed in this news release through his direct participation in the work.
Quality Assurance (QA) and Quality Control (QC)
Maple Gold implements strict Quality Assurance (“QA”) and Quality Control (“QC”) protocols at Douay covering the planning and placing of drill holes in the field; drilling and retrieving the NQ-sized drill core; drill-hole surveying; core transport to the Douay Camp; core logging by qualified personnel; sampling and bagging of core for analysis; transport of core from site to the analytical laboratory; sample preparation for assaying; and analysis, recording and final statistical vetting of results. For a complete description of protocols, please visit the Company’s QA/QC page on the website at: http://maplegoldmines.com/index.php/en/projects/qa-qc-qp-statement
About Maple Gold
Maple Gold is an advanced gold exploration company focused on defining a district-scale gold project in one of the world’s premier mining jurisdictions. The Company’s 377 km² Douay Gold Project is located along the Casa Berardi Deformation Zone within the prolific Abitibi Greenstone Belt in northern Quebec, Canada. The Project has an established gold resource[1] that remains open in multiple directions, with excellent infrastructure and several large scale operating mines within this prolific mining district. Maple Gold has now completed a significant winter drill campaign to expand on the known Resource Areas and test new discovery targets within the Company’s 55 km of strike along the Casa Berardi Deformation Zone. For more information please visit www.maplegoldmines.com.
ON BEHALF OF MAPLE GOLD MINES LTD.
“Matthew Hornor”
- Matthew Hornor, President & CEO
Forward Looking Statements:
This news release contains “forward-looking information" and “forward-looking statements” (collectively referred to as “forward-looking statements”) within the meaning of applicable Canadian securities legislation in Canada, including statements about the prospective mineral potential of the Porphyry Zone, the potential for significant mineralization from other drilling in the referenced drill program and the completion of the drill program. Forward-looking statements are based on assumptions, uncertainties and management’s best estimate of future events. Actual events or results could differ materially from the Company’s expectations and projections. Investors are cautioned that forward-looking statements involve risks and uncertainties. Accordingly, readers should not place undue reliance on forward-looking statements. Forward-looking statements include, but are not limited to, statements regarding timing and completion of the private placement. When used herein, words such as “anticipate”, “will”, “intend” and similar expressions are intended to identify forward-looking statements.
Forward-looking statements are based on certain estimates, expectations, analysis and opinions that management believed reasonable at the time they were made or in certain cases, on third party expert opinions. Such forward-looking statements involve known and unknown risks, and uncertainties and other factors that may cause our actual events, results, performance or achievements to be materially different from any future events, results, performance, or achievements expressed or implied by such forward-looking statements. For a more detailed discussion of such risks and other factors that could cause actual results to differ materially from those expressed or implied by such forward-looking statements, refer to Maple Gold Mines Ltd.’s filings with Canadian securities regulators available on www.sedar.com or the Company’s website at www.maplegoldmines.com. The Company does not intend, and expressly disclaims any intention or obligation to, update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except as required by law.
[1] (Micon 2018) 479,000 ounces at 1.59 g/t Au (Indicated category) and 2,759,000 ounces at 1.02 g/t Au (Inferred category), using a 0.45 g/t Au cut-off grade. Please visit www.maplegoldmines.com or the Company’s SEDAR filings for a copy of the Micon 2018 report.