DEPRAG SCHULZ GMBH & CO. has developed into the predestined problem-solver with the expansion of our service to include a comprehensive power-analysis. Such a power-analysis can be performed to help select a drive-system for an individual application or it can be used to test existing drives, such as air-motors, hydraulic or electric drives, grinders, drills, etc.
It is now possible to perform - within a relative short time - comprehensive tests and to simplify the selection of a suitable drive system, using our new, innovative, and freely-programmable power-test-stand, which features a maximum torque range of 500 Nm and a maximum speed of up to 12,000 rpm. While performing in a four-quadrant operation, it is now possible to carry out power-tests up to 22 kW.
Beyond power, speed and torque, it is also possible to measure operating pressure and air-consumption.
Each test-specimen is individually movable in 3-axes and the system may be flexibly adjusted to the test-specimen. Test results are compiled within a short time and without a large investment.
According to requirements, we develop graphs showing either torque or speed which are based on customer specific load-profiles.
Additionally, we can program any number of load-cycles.
DEPRAG also offers application support and the production of Air-Motors for individual customer applications (such as paint- and stain-mixing motors, drives for mixers, drives for pumps, drilling-, grinding-, and milling motors, and much more). The DEPRAG standard product-line includes air-motors with ATEX-certification II2GDc IIC T6 and T5 in a power range of 20 W - 18 kW; it includes specialty designs such as stainless-steel motors, brake-modules, turbine motors and tooth-gear motors. The DEPRAG air-motors are well suited for the use in extreme hazardous environments, such as under-water applications and where dust-, cleaning-solvents-, and acid-resistance is required. DEPRAG air-motors are also vibration insensitive and heat-resistant.
It is now possible to perform - within a relative short time - comprehensive tests and to simplify the selection of a suitable drive system, using our new, innovative, and freely-programmable power-test-stand, which features a maximum torque range of 500 Nm and a maximum speed of up to 12,000 rpm. While performing in a four-quadrant operation, it is now possible to carry out power-tests up to 22 kW.
Beyond power, speed and torque, it is also possible to measure operating pressure and air-consumption.
Each test-specimen is individually movable in 3-axes and the system may be flexibly adjusted to the test-specimen. Test results are compiled within a short time and without a large investment.
According to requirements, we develop graphs showing either torque or speed which are based on customer specific load-profiles.
Additionally, we can program any number of load-cycles.
DEPRAG also offers application support and the production of Air-Motors for individual customer applications (such as paint- and stain-mixing motors, drives for mixers, drives for pumps, drilling-, grinding-, and milling motors, and much more). The DEPRAG standard product-line includes air-motors with ATEX-certification II2GDc IIC T6 and T5 in a power range of 20 W - 18 kW; it includes specialty designs such as stainless-steel motors, brake-modules, turbine motors and tooth-gear motors. The DEPRAG air-motors are well suited for the use in extreme hazardous environments, such as under-water applications and where dust-, cleaning-solvents-, and acid-resistance is required. DEPRAG air-motors are also vibration insensitive and heat-resistant.
