With the Beamage-M2, Gentec-EO has now introduced an automated system that can determine the quality of a laser beam in only 20 to 60 seconds by means of an M2 measurement. Available exclusively from LASER COMPONENTS, this system is the only one in the world with a complete set of 50 mm optics. This allows measurements to be made on larger beam diameters and divergence angles. The detector is a particularly large CMOS sensor chip (11.3 x 11.3 mm) with a resolution of 4.2 megapixels. All measurements comply with ISO11146 and ISO13694.
Two adjustable deflecting mirrors ensure that the laser beam can be adjusted easily and flexibly. The beam path is “folded” 180° inside the device via two factory-set deflecting mirrors. This enables 400 mm of travel of beam path at an optimized speed, requiring a minimal amount of space.
With its handy design, the Beamage-M2 can be easily mounted on optical tables. This makes it ideal for use in R&D laboratories. Automatic and manual measurements are possible via user-friendly software.
The beam quality factor M2 describes the difference between the divergence angle of a laser beam and the ideal Gaussian beam. The smaller the value, the better a laser can be focused.
More Information www.lasercomponents.com/...
Trade Shows
Photonex Europe, October 10 – 11, 2018, Ricoh Arena, Coventry, UK, Booth D15
Vision, November 06 - 08, 2018, Messe Stuttgart, Germany, Booth 1G31
electronica, November 13 – 16, 2018, Munich, Germany, Booth B3.524
SPIE Photonics West, February 05 – 07, 2019, San Francisco, USA, Booth 1751
ATX West Automation, February 05 – 07, 2019, Anaheim, CA, USA, Booth 4166
BREKO, March 27 – 28, 2019, Wiesbaden, Germany
Automate, April 08 – 11, 2019, Chicago, IL, USA, Booth 8536
SPIE DCS, April 16 – 18, 2019, Baltimore, MD, USA, Booth 524
ANGACOM, June 04 – 06, 2019, Cologne, Germany
Sensors Expo & Conference, June 25 – 27, 2019, San Jose, CA, USA, Booth 419
LASER World of PHOTONICS, June 24 – 27, 2019, Munich, Germany
SPIE Optics+Photonics, August 13 – 15, 2019, San Diego, CA, USA, Booth 425
Two adjustable deflecting mirrors ensure that the laser beam can be adjusted easily and flexibly. The beam path is “folded” 180° inside the device via two factory-set deflecting mirrors. This enables 400 mm of travel of beam path at an optimized speed, requiring a minimal amount of space.
With its handy design, the Beamage-M2 can be easily mounted on optical tables. This makes it ideal for use in R&D laboratories. Automatic and manual measurements are possible via user-friendly software.
The beam quality factor M2 describes the difference between the divergence angle of a laser beam and the ideal Gaussian beam. The smaller the value, the better a laser can be focused.
More Information www.lasercomponents.com/...
Trade Shows
Photonex Europe, October 10 – 11, 2018, Ricoh Arena, Coventry, UK, Booth D15
Vision, November 06 - 08, 2018, Messe Stuttgart, Germany, Booth 1G31
electronica, November 13 – 16, 2018, Munich, Germany, Booth B3.524
SPIE Photonics West, February 05 – 07, 2019, San Francisco, USA, Booth 1751
ATX West Automation, February 05 – 07, 2019, Anaheim, CA, USA, Booth 4166
BREKO, March 27 – 28, 2019, Wiesbaden, Germany
Automate, April 08 – 11, 2019, Chicago, IL, USA, Booth 8536
SPIE DCS, April 16 – 18, 2019, Baltimore, MD, USA, Booth 524
ANGACOM, June 04 – 06, 2019, Cologne, Germany
Sensors Expo & Conference, June 25 – 27, 2019, San Jose, CA, USA, Booth 419
LASER World of PHOTONICS, June 24 – 27, 2019, Munich, Germany
SPIE Optics+Photonics, August 13 – 15, 2019, San Diego, CA, USA, Booth 425
