With the IS50A-1KW-RSI-INT-DO from Gentec-EO, LASER COMPONENTS offers a measuring device that detects even the smallest fluctuations in laser power in less than 200 ms. This makes it possible to track the entire ramp-up process of a laser.
The incoming laser beam is attenuated by an integrating sphere so that the Si photodetector, with its advantages in speed and signal quality, can be used in a dynamic range between 0.2 mW and 1 kW. In a wavelength spectrum from 340 nm to 1100 nm, this also supports sources in continuous wave (cw) mode, as well as pulsed sources with a repetition rate of at least 10 kHz. It is designed for a maximum average power density of up to 5 kW/cm2.
This versatility, therefore, makes the system particularly interesting for laboratories and service technicians who come into contact with a wide variety of lasers and want to cover them with one device.
The incoming laser beam is attenuated by an integrating sphere so that the Si photodetector, with its advantages in speed and signal quality, can be used in a dynamic range between 0.2 mW and 1 kW. In a wavelength spectrum from 340 nm to 1100 nm, this also supports sources in continuous wave (cw) mode, as well as pulsed sources with a repetition rate of at least 10 kHz. It is designed for a maximum average power density of up to 5 kW/cm2.
This versatility, therefore, makes the system particularly interesting for laboratories and service technicians who come into contact with a wide variety of lasers and want to cover them with one device.
