CEC ermöglicht über ein High Definition Multimedia Interface (HDMI) die gekoppelte Steuerung von digitalen Fernsehern, DVD-Rekordern und anderen Geräten über eine einzige Kabelverbindung. Mit Hilfe der neuen 16-Bit-Mikrocontroller 78K0R/KF3-C und 78K0R/KG3-C lässt sich nicht nur der Aufwand für die Entwicklung der Steuerungssoftware reduzieren. Die erstmalige Umsetzung der CEC-Funktionen in Hardware führt auch zu einer radikalen Reduzierung des Stromverbrauchs, da die CPU des Mikrocontrollers nicht mehr wie bisher üblich durch die kontinuierliche Überwachung des Systemstatus belastet wird. Mit einer Stromaufnahme von minimal lediglich 0,5 µA gegenüber bisher 0,5 mA konnte hier bei den neuen Bauteilen eine Verbesserung um Faktor 1000 erzielt werden.
Da der Embedded CEC- und der Fernbedienungsempfänger in Hardware realisiert sind, können die Signale von beiden Einheiten - CEC und Fernbedienung - zudem gleichzeitig verarbeitet werden, was wiederum die Systembedienbarkeit deutlich verbessert.
Die mit 20 MHz getakteten Mikrocontroller sind mit bis zu 128 KByte Flash und 8 KByte RAM erhältlich und zeichnen sich wie alle 16-Bit-MCUs der 78K0R/Kx3-Serie durch ein erstklassiges Power/Performance-Verhältnis von lediglich 1,8 mW/MIPS aus. Features wie die dreistufige Pipeline ermöglichen der CISC-Architektur zudem hohe Verarbeitungsgeschwindigkeiten von bis zu 13 MIPS. Bei 20 MHz Taktfrequenz beträgt die minimale Befehlausführzeit gerade einmal 50 ns.
Zur weiteren Standardausstattung zählen u.a. ein Spannungsdetekor zur Erkennung zu niedriger Spannungen, ein interner Oszillator, eine Power on Clear (POC)-Funktion und Single-Voltage-Flash.
Für die vier neuen Mikrocontroller stehen die gleichen Evaluation Boards und On-Chip-Debugger zur Verfügung, die NEC Electronics für alle 16-Bit-Mikroontroller anbietet. Darüber hinaus wird derzeit ein spezielles zusätzliches CEC-Monitor-Softwareprogramm entwickelt, dass die Simulation der CEC-Funktionen erlauben wird.
Die Modellvarianten 78K0R/KF3-C sind in einem 80-Pin-LQFP, die Typen 78K0R/KG3-C in einem 100poligen LQFP untergebracht. Die Auslieferung erster Muster ist für das 4. Quartal dieses Jahres geplant, die der Verfügbarkeit von Serienprodukten für Mitte 2009.