This new technology is ideal for individual labelling, identifying or marking, and extends OKW's comprehensive service portfolio many times over.
Company logos and equipment labels are applied permanently with this laser marking, and they are also water and smudge-proof. It is particularly practical for very small machine-readable markings such as QR codes or barcodes. Continuous marking can be carried out quickly, easily and cost-effectively. The use of a laser physically changes the colour of the surface. This makes it more resistant than printing on the enclosure. Laser marking involves a colour change on the surface. Dark and light plastic parts turn grey at the points to be marked. Suitable materials include: ABS, ASA+PC, ASA+PC-FR, PC, PA, PA GF and aluminium. Depending on the source material, the colours off-white, pebble grey, light grey, lava and black are suitable for particularly high-contrast marking. In addition to laser marking, OKW Gehäusesysteme offers photo-quality digital printing (up to 1800x1800 dpi) on surfaces with a height difference of up to 2.5 mm. Colour gradations and white as a full-tone colour are also possible. As with laser marking, set-up costs are lower than for conventional screen and tampo printing. These methods are therefore particularly suitable for small quantities.
In addition to the above mentioned processes, OKW Gehäusesysteme offers further processing and finishing techniques. These include, for example, mechanical processing for interfaces, high-quality UV-resistant 2-component varnishing, printing, decor foils, EMC vapour-plating or membrane keypads.
Company logos and equipment labels are applied permanently with this laser marking, and they are also water and smudge-proof. It is particularly practical for very small machine-readable markings such as QR codes or barcodes. Continuous marking can be carried out quickly, easily and cost-effectively. The use of a laser physically changes the colour of the surface. This makes it more resistant than printing on the enclosure. Laser marking involves a colour change on the surface. Dark and light plastic parts turn grey at the points to be marked. Suitable materials include: ABS, ASA+PC, ASA+PC-FR, PC, PA, PA GF and aluminium. Depending on the source material, the colours off-white, pebble grey, light grey, lava and black are suitable for particularly high-contrast marking. In addition to laser marking, OKW Gehäusesysteme offers photo-quality digital printing (up to 1800x1800 dpi) on surfaces with a height difference of up to 2.5 mm. Colour gradations and white as a full-tone colour are also possible. As with laser marking, set-up costs are lower than for conventional screen and tampo printing. These methods are therefore particularly suitable for small quantities.
In addition to the above mentioned processes, OKW Gehäusesysteme offers further processing and finishing techniques. These include, for example, mechanical processing for interfaces, high-quality UV-resistant 2-component varnishing, printing, decor foils, EMC vapour-plating or membrane keypads.
