Photonfocus is pleased to announce the new monochrome MV1-D1312-240-CL-8 camera, which to the best of our knowledge is the fastest CameraLink® Base camera in the world.
The new 1.4 Megapixel CMOS-camera MV1-D1312-240-CL-8 comes with a frame rate increase of +50% compared to the so far fastest MV1-D1312-160-CL-12 Camera-Link® Base camera. This means that the new camera is operating at the limits of possible frame rates achievable by a Camera-Link® Base camera. For a 1024 by 1024 resolution the frame rates breaks through the barrier of 200fps achieving 217fps just with a CameraLink® Base interface.
With the new MV1-D1313-240-CL-8 camera Photonfocus is able to expand the speed range of their Camera-Link® Base cameras thus being able to offer a price wise interesting solution for some applications that so far had to rely on Camera-Link® Medium/Full interface cameras.
The advantage of saving costs is even more significant where two or four Camera-Link® Full cameras are used as for example with stereo- or quad vision systems for motion analysis. Using the new MV1-D1313-240-CL-8 cameras not only saves costs on the camera side but as well on cabling and frame grabber. Two MV1-D1312-240-CL-8 cameras can be connected to one Camera-Link® Base frame grabber, rather than having to use two Camera-Link® Full frame grabbers. In a multi camera system the number of cables and frame grabbers halves.
Features
- 1248 x 1082 pixel resolution
- Up to 169 fps @ full resolution
- Good Near Infrared (NIR) response
- Extended set of features and functionality
- High sensitivity over wide spectral range from 320 to 1030 nm
- High Quantum efficiency (> 50%)
- High pixel fill factor (> 60%)
- High dynamic range of up to 120 dB via LinLog® Technology
- Sensor without cover glass
- 8 bit grayscale resolution
- Superior signal-to-noise ratio (SNR)
- Low power consumption at high speeds
- Global shutter
- Very high resistance to blooming
- On camera shading correction
- 3x3 convolver for image pre-processing in the camera
- Up to 512 regions of interest (MROI) and decimation
- 2 look-up tables on user-defined image region (Region-LUT)
- Temperature monitoring of sensor and camera
- Crosshairs overlay on the image
- Image information and camera settings inside the image (status line)
- Advanced trigger input and strobe output
- Compact camera size of 60 x 60 x 45 mm
- Software (GUI + SDK) provided for setting and storage of camera parameters
- CameraLink Base interface
Direct-Link: Photonfocus MV1-D1312-240-CL-8 Flyer and Manual:
http://www.rauscher.de/...
AUTOMATICA
Halle B2 – Stand 302
For more information please contact:
RAUSCHER
Johann-G.Gutenberg-Str. 20
D-82140 Olching
Phone +49 81 42 / 4 48 41-0
Fax +49 81 42 / 4 48 41-90
E-Mail: info@rauscher.de
www.rauscher.de
The new 1.4 Megapixel CMOS-camera MV1-D1312-240-CL-8 comes with a frame rate increase of +50% compared to the so far fastest MV1-D1312-160-CL-12 Camera-Link® Base camera. This means that the new camera is operating at the limits of possible frame rates achievable by a Camera-Link® Base camera. For a 1024 by 1024 resolution the frame rates breaks through the barrier of 200fps achieving 217fps just with a CameraLink® Base interface.
With the new MV1-D1313-240-CL-8 camera Photonfocus is able to expand the speed range of their Camera-Link® Base cameras thus being able to offer a price wise interesting solution for some applications that so far had to rely on Camera-Link® Medium/Full interface cameras.
The advantage of saving costs is even more significant where two or four Camera-Link® Full cameras are used as for example with stereo- or quad vision systems for motion analysis. Using the new MV1-D1313-240-CL-8 cameras not only saves costs on the camera side but as well on cabling and frame grabber. Two MV1-D1312-240-CL-8 cameras can be connected to one Camera-Link® Base frame grabber, rather than having to use two Camera-Link® Full frame grabbers. In a multi camera system the number of cables and frame grabbers halves.
Features
- 1248 x 1082 pixel resolution
- Up to 169 fps @ full resolution
- Good Near Infrared (NIR) response
- Extended set of features and functionality
- High sensitivity over wide spectral range from 320 to 1030 nm
- High Quantum efficiency (> 50%)
- High pixel fill factor (> 60%)
- High dynamic range of up to 120 dB via LinLog® Technology
- Sensor without cover glass
- 8 bit grayscale resolution
- Superior signal-to-noise ratio (SNR)
- Low power consumption at high speeds
- Global shutter
- Very high resistance to blooming
- On camera shading correction
- 3x3 convolver for image pre-processing in the camera
- Up to 512 regions of interest (MROI) and decimation
- 2 look-up tables on user-defined image region (Region-LUT)
- Temperature monitoring of sensor and camera
- Crosshairs overlay on the image
- Image information and camera settings inside the image (status line)
- Advanced trigger input and strobe output
- Compact camera size of 60 x 60 x 45 mm
- Software (GUI + SDK) provided for setting and storage of camera parameters
- CameraLink Base interface
Direct-Link: Photonfocus MV1-D1312-240-CL-8 Flyer and Manual:
http://www.rauscher.de/...
AUTOMATICA
Halle B2 – Stand 302
For more information please contact:
RAUSCHER
Johann-G.Gutenberg-Str. 20
D-82140 Olching
Phone +49 81 42 / 4 48 41-0
Fax +49 81 42 / 4 48 41-90
E-Mail: info@rauscher.de
www.rauscher.de
